AGPtek® 170°8 LED Night Vision Car-AGPtek® 170°8 LED
Length 0in. Weight 0lbs.
Image Sensor: Color CMOS
Lens Angle: 170 Degree
Sensing area: NTSC 4.08 x 3.10mm
Effective Pixels: NTSC 510*496 pixels
Horizontal Resolutions: 420 TV lines
Minimum Illumination: 0lux with IR on
Video output: RCA connector, 1.0V p-p, 75ohm
Power Consumption: 60mA
Power Supply: DC12V
Operating Temperature: -20 – 60 (Celsius Degree) RH95%MAX
Dimensions: 12.21″ x 6.34″ x 1.06″ / 310 x 161 x 27 mm
1.This camera has a mirror image.
2.This camera only supports NTSC video system, so please make sure your monitor supports NTSC video system
before you buy it.
3.You can install the camera on your license plate. During installation, please connect the power cable of the
backup camera to the harness wires that connect to the backup light on the tail light assembly (Please note
that the red wire end is positive, while the black one is negative). And connect the RCA output end to the car
4.The camera switch is controlled by the reverse gear shift.
5.Please take care of the sealing to prevent water leakage when installation.
1 x Car Rear View Camera
1 x 1m Power Cable
1 x 20 feet RCA Video Cable
1 x User ManualAGPtek® 170°8 LED.